|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
21 October 2011 Announcement |
Gold content of Gold Pen
Plating Solution increased to 12 grams per litre. |
14th October 2011 Announcement |
New Battery Plating Pen
introduced which takes 3 AAA size batteries. Improvements include: |
10 September 2011 |
Plating on Glass video added
to our site. Watch an area of studio glass being plated by clicking
HERE |
2nd August 2011 Announcement |
Cyanide content of brush
plating solutions: Spa Plating's policy. |
We only supply a limited number of solutions containing cyanide and these are confined to our gold plating solutions (not including K-Gold or K-Gold Bright which are cyanide free). However, the level of cyanide in our solutions is not enough to class them as toxic or poisonous. Please be aware that some plating solutions from other suppliers contain very high levels of cyanide and should be handled with extreme caution. As stated below; please do not mix any of Spa Plating's solutions with other suppliers solutions.
2nd
June 2011 Announcement |
Some of our solutions have
been designed to be mixed. Please only mix Spa Plating's solutions and
do not mix with other suppliers solutions; if our solutions are mixed
with other suppliers' solutions, this may give rise to undesirable
reaction products! |
2nd
June 2011 Announcement |
It has come to our attention
that some other suppliers are passing their solutions off as identical
or similar to Spa Plating's solution. We strongly refute this and
further claim that our solutions are unique to us. We do not supply any
solutions that are classified as toxic or corrosive for example. |
10th May 2011 |
White Palladium added to the
online shop. Both whiter and harder than pure palladium. Read more about
this product here:
http://www.goldn.co.uk/products/white_palladium.htm |
3rd May 2011 |
PP Stabiliser introduced.
This additive to PP Copper produces a copper layer that is tarnish
resistant and is of use to customers plating large areas in copper and
of especial use to those building up thick layers of reflective copper
when plating on non-conductors. |
28th April
2011 |
New high capacity nickel plating solution
developed for use with plating on both metal and non-conductors. |
15th April 2011 |
New look online shop introduced. |
4th April 2011 |
Conductive Silver Ink (hi-grade) developed for
application by both brush and airbrush.
|
18th February 2011 |
Process for plating on non-conducting materials
extended to glass with the introduction of Glass Primer:
http://www.goldn.co.uk/products/glass_primer.htm |
20th January 2011 |
New process developed for plating on
non-conducting materials including wood. |
12 December 2010 |
Conductive Silver Ink (hi-grade) offered for
sale in 5 and 15ml containers. |
20th November 2010 |
Research begins on new water-based conductive
ink. |
27th October 2010 |
MPU Course introduced: especially useful for
polishing surfaces then going straight into the plating sequence. |
20th October 2010 |
Fine version of MPU (MPU Fine) introduced for
producing totally scratch free finishes. |
15th September 2010 |
Silver Pen Plating solution developed for use
with both the Battery Plating Pen and the standard pen with a
concentration of 75 grams per litre of silver. |
2nd September 2010 |
Process introduced to plate on zinc (please see
manual for more information). |
23rd August 2010 |
Plating Calculations page
updated to include most of our plating solutions. |
View this page at: http://www.goldn.co.uk/calc.html Copyright © 2011 Spa Plating. All rights reserved
|