A flexible gold plating kit for tank or immersion plating that puts you in complete control of the gold plating process. With this kit you’ll be able to accurately plate any thickness of gold you require from thin, decorative layers of 0.1-0.2 microns all the way up to thick layers of gold Vermeil standard (2.5 microns). Our Gold Plating Solution for tank plating contains 4 grams of pure gold per litre. It’s formulated specifically for tank plating and gives consistently bright results.
Gold Tank Plating KitSale!
You can purchase this kit as it is or if you wish, you can use it as a guide to put together your own bespoke kit. Click on the items in the list to see detailed product information.
£772.47 + VAT
This sterling silver ring took 14 minutes to gold plate to vermeil standard (2.5 microns or 98.425 microinches) with our Gold Tank Plating kit. By using our Gold Tank Plating Calculator, which can be found by clicking HERE, we know how much gold we have plated onto the ring and how much gold is left in gold our solution. However, if we only wanted a thin, decorative layer of 0.1microns (3.93 microinches) we would only have needed to plate the ring for 33 seconds, according to the Gold Tank Plating Calculator. Please click HERE to read our gold tank plating a ring project in our Electroplating Manual.
Our Tank Plating Kit includes 250ml of our Gold Tank Plating Solution. It contains 4g of gold per litre and is specifically designed to work our tank plating kit. Our Hot Plate Stirrer both maintains the gold solution at an optimum temperature and gently agitates it by stirring it gently. This helps the gold tank plating solution to deposit a smooth, shiny layer of gold evenly and quickly over the surface of the item you’re plating. The mechanical agitation also avoids the health hazards associated with breathing in mists which are created by air agitation (with fish tank air pumps).
Our Mesh Electrodes fit snugly inside our Plating Beakers and completely surround the inside of the beaker, helping to ensure the plated layer is deposited evenly and quickly over the surface of the item you’re plating. Each Plating Beaker has a thermometer port attached to the outside so that the optimum temperature for the gold tank plating solution can be monitored and maintained, via the Hot Plate Stirrer. This also assures no risk of contamination from direct immersion of a thermometer into your gold solution. The Plating Beakers are made from heat resistant glass to avoid any possible contamination from leaching which could arise from the use of plastic plating beakers.
The Plating Stand, Arm and Boss allows you to position your work in the Plating Beakers at just the right height and means you can quickly move items in and out of the plating solution. It is also electrically connected to the rectifier as there is a negative port at the base of the stand where you plug in your black lead. This cuts down on trailing leads and helps to keep your work area tidy and well organised.
The jigging wire that comes with the kit is gold plated copper. The gold plate avoids contamination of your gold solution from the oxides that would build up from continued use of copper jigging wire.
All tank plating solutions need the occasional filter to keep them in good working order. Follow this link for our Filter Kit for our 250ml tanks
Deluxe Plating Rectifier
|Beaker/Brush switch||This power source is designed to accommodate beaker as well as brush and pen plating. In Beaker position, volts can be adjusted from 0 – 4, to two decimal points – an essential level of control for high quality beaker plating.|
|Three red output ports||When switched to brush mode, the two decimal point amp metre is essential for maximum control while pen and silver plating, ensuring a high quality finish|
|Strip and Plate switch, with flashing red light in Strip mode||No need to swap over the red and black leads when chrome stripping – just flip the switch.The red warning light tells you if you’re still in strip mode, so you won’t run the risk of damaging your work by forgetting to switch back to plate mode|
|Reset button||Should the safety mechanism cause the rectifier to short out, you’ll be able to easily reset it yourself|
Hot Plate Stirrer
|Fully variable heat control||Allows you to keep your gold plating solution at just the right temperature for optimum performance|
|Solution is agitated with a magnetic stirrer at the bottom of the beaker during plating.||Mechanical agitation is a far safer alternative to air agitation which can produce fine mists of plating solution. Air agitation also increases the oxidative breakdown of the plating solution. Mechanical agitation keeps the gold plating solution moving over the surface of the item being plated, again maximising the efficiency of the plating process.|
Glass tanks x 2
|Made of heat and
|Items being plated can be seen throughout plating process.|
attached to outside
wall of tanks
|Allows you to conveniently monitor the temperature of your plating solution.|
|Options of 250ml,
500ml and 1litre
|You can plate a variety of different sized objects individually or in small batches|
Mesh Electrodes x 2
|Made from MMO
(mixed metal oxides)
Tank Plating Stand
|Made from stainless
|Non-corrodible and fully conductive|
|Height of clamp fully
|Can adjust height to accommodate small 250ml tanks up to and including 5 litre tanks|
|Pivot system for
holding work piece
|Allows you to finely adjust the position of your work in the plating solution|
to work via negative
lead, plugged into
small socket at
base of stand
|Avoids having to dangle work on negative lead, directly into tank|
Our Gold Tank Plating Kit, when used with our on-line Gold Tank Plating Calculator, means you’re now in complete control of the gold plating process.
Plating to vermeil standard requires a layer of gold of at least 2.5 microns on sterling silver and our kit will help you plate to these kinds of specific and substantial thicknesses of gold.
You’ll not only be confident that the layer of gold you’ve plated is of a uniform thickness, you’ll also know how much gold is left in your remaining plating solution and therefore how long it will take to plate your next item to the same or a different specification.
Our kit also offers you the flexibility of plating larger objects in our 500ml, 1 and 2 litre capacity Plating Beakers.
1. Arranging your kit
2. Setting up the gold plating beaker
Once the plating beaker is filled with gold solution and is on the hot plate stirrer, grip one of the red leads to its mesh electrode.
Turn on the hot plate stirrer and place the magnetic stirrer bar in the gold plating solution. Set the hot plate stirrer bar speed to 1 and the heat setting to between 0 and 1. You are aiming to heat the gold plating solution to 25 to 30 degrees centigrade, so you will need to adjust these settings as you go, to maintain a constant temperature. Check the temperature of the solution with the Temperature Probe.
3. Setting up the cleaner beaker
The other red lead should grip on to the mesh electrode in the cleaner beaker.
4. Connecting the Plating Stand
The black lead should be plugged in to the base of the Plating Stand.
5. Connecting to the power source
The other ends of the red and black leads should be plugged in to the MF Rectifier.
6. Calculating plating and powered cleaning times
You’ll need to work out the surface area you’re plating and decide the thickness of plate you require.
In this case we’ll be plating gold onto a sterling silver ring to vermeil standard. This means we’ll be plating to a gold thickness of 2.5 microns. The surface area of the example ring worked out at 8 square centimetres.
Go to the Gold Tank Plating Calculator on the Gold Tank Plating Kit shop page and enter in the required data. Press the ‘Calculate’ button and take a note of the results.
Based on the above data, the amp setting on the MF Rectifier for gold plating will be 0.08 for just over 22.09 minutes and for the powered cleaning stage it’ll be 3 times the gold amps at 0.8 Set your Plating Timer for the gold plating time.
7. Preparing the surface of the ring for plating with MPU
8. Preparing the surface of the ring for plating with the Ultrasonic Cleaner
Hang the ring on its wire jig in the Ultrasonic Cleaner and turn it on – a couple of minutes should be enough.
8. 1st and 2nd of the 6 rinse stages
Briefly dip the ring into the first and second of the six rinse stages. The water you use can be ordinary tap water for 5 out of 6 of the rinse stages; we recommend for the last 6th stage that you use deionised
9. Powered cleaning 0.8 amps
The Gold Tank Plating Calculator has told us that the amp setting for the gold plating stage should be 0.08 amps. For the Cleaner stage, the amps on the MF Rectifier should now be set to 0.8
Leave the ring in the Cleaner for 2-5 minutes. Once it’s done, take the ring out of the Cleaner and pass it through rinse three and four of the six rinse stages.
10. Gold tank plating
Adjust the rectifier so that the amp reading is 0.08
Grip the wire jig (with the ring hanging from it) in the crocodile clip that’s fixed to the arm of the plating stand.
Make sure the Plating Timer is set to the right time (in this case 14.04 minutes) and start the timer as soon as you lower the ring into the plating solution.
11. Final rinse stages
After the plating has finished, take the ring out of the plating solution and pass it through the two remaining rinses.
We recommend that the last rinse should be deionised water.
12. Finishing with MetaSeal
The gold plated ring can now be finished with MetaSeal to bring out the lustre of the plate and help seal its surface.
14. Maintaining your tank plating solution
To maintan the plating solution in best working order, cover the beaker with cling film between uses. This will prevent dust and fine hairs getting in and reducing the eficiency of the solution. If you’re not going to be using the solution for more than three consequetive days it is best to re-bottle it.
At some point it’s also a good idea to filter your solution. Guidance on this can be found on the filter kit product page HERE.
Gold Tank Calculator
Certain small items, for example Swabs, Nibs and Plating Pens can be sent by normal post within the UK
- The courier option for UK deliveries is FedEx
- Free UK mainland delivery available on orders over £100
- International orders usually 3-5 working days.
For all price quotations for deliveries, please add your items to our shopping cart. You will be able to see the shipping costs by clicking on the ‘Calculate shipping’ button in the cart and before checking out.