With our rose gold tank plating kit you’ll be able to choose the shade of rose gold you want to plate and with the help of our Rose Gold Tank Plating Calculator, plate to your required thickness. Please see the tabbed panel below for more details.
Rose Gold Tank Plating KitSale!
You can purchase this kit as it is or if you wish, you can use it as a guide to put together your own bespoke kit. Click on the items in the list to see detailed product information.
£766.17 + VAT
These sterling silver rings have been rose gold tank plated using our Rose Gold Tank Plating Kit and Rose Gold Tank Plating Solution. Our Replenisher System enables you to control the shade of rose gold you require. If you want a richer, redder shade of rose gold you can add our Replenisher B to your new bath, if you want a paler deposit you can add our Replenisher A. For guidance on this, please click HERE to see the ‘Tech Specs’ on our Rose Gold Tank Plating Solution product page. This kit (or any of our other kits, equipment or solutions) is not suitable for plating on to aluminium or titanium and therefore can’t be used to plate iPhones and other similar products. If you are planning on tank plating on to copper and its alloys including brass and bronze you’ll need to brush plate a barrier layer of either palladium or nickel to protect your tank plating solution.
All tank plating solutions need the occasional filter to keep them in good working order and this kit includes one of filter kits to keep your solution working at its optimum level.
A note on our kits;
Every item in our electroplating kits
- makes an important contribution to the overall success of the plating process
- has been thoroughly tested to ensure it performs its job at the highest level in the overall electroplating process
- is either made in-house or has been carefully sourced from our trusted suppliers
These factors ensure consistent, top quality plating results for a fair price.
Our Rose Gold Plating Kit includes;
Rose Gold Tank Plating Solution 250ml
|Formulated specifically for tank plating||Plates consistently bright up to 1 micron|
|Additive system based on online calculator||Helps maintain the bath and keep constant colour of rose gold plate|
|Different shades of rose gold possible||Allows you to plate shades from pale red to red|
|Plates bright and hard up to 1 micron||Wear rate much decreased and increased scratch resistance|
|Current can be set at start of tank plating process and will remain set at that level throughout||No need to check and adjust the setting once the plating process has started, leaving you confident that plating is taking place at a constant level.|
|Amp meter readable to 2 decimal places||Amp meter readable to 2 decimal places|
|Can be adjusted for use with brush plating||Allows you to use the brush plating process as a compliment to the tank plating process, which allows for greater flexibility.|
|Voltage controlled via a selector switch enabling a range from 3 up to 12 volts. Maximum current is 1.5 amps.||For this kit, used to power the electrocleaning stage to achieve a perfect, water-break free surface. Also can be used for small, one-off silver and gold brush plating plating jobs when used with our brush plating equipment.|
Glass Plating Beaker
Comes in 250ml, 500ml and
1litre sizes. With the Mesh Electrodes inserted, the internal dimensions of each size beaker are as follows; 250ml; Height – 7cm, Diameter – 6cm 500ml; H – 10cm, D; 8cm 1Lt; H;13cm, D;8cmPlate different sized objects individually or in small batches, from rings to trophies.
|Made of pyrex glass||
Hot Plate Stirrer
|Fully variable heat control||Allows you to keep your rhodium tank plating plating solution at just the right temperature for optimum performance|
|Rhodium plating solution is agitated with a magnetic stirrer at the bottom of the beaker during plating.||Mechanical agitation is a safer alternative to air agitation, as it eradicates any risk of the aerosol effect of the rhodium tank plating solution. Mechanical agitation keeps the plating solution moving over the surface of the item being plated in a consistent way, again maximising the efficiency of the tank plating process. Mechanical agitation avoids unnecessary oxidisation of the metal plating solution that air agitation will cause.|
Palladium Plated Test Strips (5 pack)
|Each brass test strip has been palladium plated in house.||The palladium plate provides a reliable colour base for testing the shades of coloured metals. Essential for establishing the desired shade of the different coloured golds we sell, for example rose, white and green.|
|Temperature of solutions can be monitored by pointing the probe at the tank, pulling the trigger with the temperature shown on the LED screen.||The temperature of your plating solution can be quickly and accurately monitored without you having to submerge a thermometer into the solution, avoiding contamination of your plating solution.|
Plating Arm and Clamps
|Made bespoke from solid stainless steel||Fully conductiveWill not corrode and contaminate gold tank plating solutionCan moved up or down the stand in any position to fit any size of plating beaker.|
|Has ball head join point at one end to accommodate crocodile clip||Ball head allows complete 360 degree movement of crocodile clip, so you can quickly and easily make fine adjustments to the position of you work in the plating solution.|
|Made from stainless steel||
|Designed to be used with our Plating Arm and Clamp||Allows for complete flexibility – you can adjust height to of arms to accommodate small 250ml tanks up to and including 5 litre tanks|
|Electrical connection to work via negative lead, plugged into small socket at base of stand||Again avoids having to dangle work on negative lead directly into tank.Can be attached to the base of the Hot Plate Stirrer.|
Gold Plated Jigging Wire
|Gold plated||No risk of contamination of plating solution during plating|
|Easy to bend by hand||You’ll be able to easily shape jigs for complexly shaped items or a number of smaller items.|
|One stage cleaning and activating product||For cleaning and activating in one stage, can replace the ActiClean stage – saves time and money|
|Can be used during the plating process without having to re-electroclean and activate||Clearing burns or other marks produced during plating – all you have to do is rinse and carry on plating|
|Non-abrasive||Brings out the final lustre of your work and cuts out the hard work associated with final finishing|
|Special formulation||Seals in the shine and slows tarnishing|
|Fast efficient electro-cleaner||Efficiently creates a water break free surface. Doesn’t attack paint, so safe to use on partially painted surfaces such as car badges. Cleans and reduces oxide layer before activation. Removes tarnish from silver and oxide coating from copper and brass, when used at 10-12 volts.|
|Includes 1Rinse Beaker (250ml),1Funnel Holder1Funnel 250ml, Filter Papers 250ml ( 5 pack)||All tank plating solutions occasionally need filtering to remove particles that build up over time. Our filtering kit makes the process of keeping your tank plating solution in tip top condition easy to set up and mess free. Added to this, regular filtering can help you save money by extending the working life of your tank plating solution.|
Our Rose Gold Tank Plating Kit and a fresh bath of our Rose Gold Tank Plating Solution will plate an 18 karat layer of rose gold plate. This guide takes you through the steps of using this kit by showing you how to prepare a test strip as a sample, or swatch of our 18kt Rose Gold Tank Plating Solution. Once this is done, you will have established a standard shade of 18kt rose gold that you can refer back to.
It is vital to do test strip because, as you plate your items, you will deplete your rose gold plating solution and will need to add more of our Rose Gold Tank Replenisher A and B to maintain this 18kt shade of rose gold. By comparing your plated pieces to the initial test strip, you will be able to judge when the bath needs to be topped up with the replenishers.
This isn't the only way of telling if the rose gold bath needs replenishing, as using our Rose Gold Tank Plating Calculator will also indicate what needs to be added to maintain an 18kt shade as you plate your items.
Of course, once you have plated a number of items and become used to adding the replenisher A and B to maintain this shade of 18kt rose gold, you can then experiment with achieving different shades of rose gold. Adding Replenisher A to an 18kt bath increases the paleness of the deposit by increasing the amount of gold in the deposit. Conversely, adding Replenisher B to an 18kt bath increases the redness of the deposit by increasing the amount of copper in the deposit.
Working out the settings for your Rose Gold Tank Plating Kit with our Rose Gold Tank Plating Calculator and instructions on maintaining the 18kt shade of rose gold of your plating bath
Before you start setting up your kit you will need to use our Rose Gold Tank Plating Calculator to work out plating times and settings for the Tank Plating Rectifier. All of our Palladium Plated Test Strips are a standard surface area of 20 squared centimetres up to the scored line. Open the Rose Gold Tank Plating Calculator and enter in 0.20 where it asks for the thickness in microns. Then for surface area put in 20 and volume of solution purchased, 1000ml. Press the ‘Calculate’ button and make a note of the settings. These are the settings that you will use to set up your MF Rectifier and to time the plating process. It will tell you how much of the Replenisher A and B you will need to add after you have plated, to return the bath to an 18kt rose gold.
Clearly, it is impossible to measure out the very small amounts of replenisher that the calculator returns on one plate. What you will need to do is to keep a note of the suggested amounts of Replenisher A and B after each plate and when it has reached a measurable amount, add this to the bath.
1. Setting up your rose gold tank plating equipment
For guidance on setting up your tank plating equipment please click HERE for our rhodium tank plating guide, as the equipment used is the same as our Rose Gold Tank Plating kit. Please remember to set the Tank Plating Rectifier to the setting recommended on our Rose Gold Tank Plating Calculator and the Economy Rectifier, which is used to power the Cleaner bath, should be adjusted to 3 volts.
2. Bringing the Rose Gold Plating Solution up to temperature
For the purposes of making a test strip we recommend the operating temperature of your rose gold solution should be 60 degrees centigrade. While the solution is coming up to temperature the stirring mechanism of the Hot Plate Stirrer will need to be turned on. Place the Mini Stirring Bar in the rose gold beaker so that the solution is agitated throughout the heating process, to ensure even heat distribution. Monitor the temperature of your solution with your Temperature Gauge.
3. Turning off the Stirrer
Once the solution is up to temperature, turn off the Stirrer.
4. Peeling off the plastic
To plate the test strip you’ll first need to peel off the clear strip of blue plastic. You will now clearly see the scored line that you’ll immerse the strip up to in the plating bath.
5. Cleaning the test strip with MPU Fine
Clean the palladium plated surface with a small amount of our MPU Fine.
6. Electrocleaning the test strip
To ensure you have a completely water break free surface, place the test strip in the bath of Cleaner. Leave it in the Cleaner for about a minute.
7. Rinsing the test strip
Once the test strip has been cleaned, rinse off the Cleaner by using our Rinse Bottle over the bath of Cleaner. This will contain traces of Cleaner in the Cleaner bath and stop cross contamination of your rose gold solution. Pass the test strip through the two rinse baths.
8. Plating the test strip in the Rose Gold Plating Solution
Position the test strip in the rose gold bath so that the strip is submerged up to the scored line. Switch on the Tank Plating Rectifier to start the plating.
9. Turning on the Tank Plating Rectifier
Switch on the Tank Plating Rectifier to start the rose gold plating.
9. Setting the time
Start the Plating Timer.
10. Rinsing the test strip
Once the plating time is up, switch off the rectifier and remove the test strip from the crocodile clips. Again, use the Rinse Bottle to rinse off any solution back into the plating beaker to contain as much as the contents of the bath in the plating beaker as possible.
11. Final rinse
Pass the test strip through the final rinse bath.
12. Final finishing
Finish your 18kt rose gold test strip with MetaSeal.
This test strip now provides a record of how the plate looks for 18kt rose gold and will provide an essential reference point for subsequent plating results.
Rose Gold Tank Calculator
Certain small items, for example Swabs, Nibs and Plating Pens can be sent by normal post within the UK
- The courier option for UK deliveries is FedEx
- Free UK mainland delivery available on orders over £100
- International orders usually 3-5 working days.
For all price quotations for deliveries, please add your items to our shopping cart. You will be able to see the shipping costs by clicking on the ‘Calculate shipping’ button in the cart and before checking out.