Home

Shop

Plastic Plating Starter Kit
Now, for the first time, you can brush plate on the majority of non-conductive surfaces, with our revolutionary Plating on Plastic Starter Kit.

After much research the best sequence for this process is as follows;

1. Undercoat the surface with spray-on lacquer

2. Apply our Conductive Ink

3. Build up a layer of PP Copper*

4. If wanting to gold plate, plate a barrier layer of nickel*, white bronze, palladium or white palladium

5. Gold Plate

Everything you need can be bought either directly from us or through our distributors. This kit contains these crucial elements;

• Conductive Ink (hi-grade) - extremely conductive and easily applied with a brush
  
• Conductor Strips - increases the surface area of electrical contact which dramatically increases plating speeds
  
• Copper Plating Solution which, when mixed with our Bronze Mixer at a ratio of 1:1, creates white bronze which can be used as a substitute for Nickel Plating Solution
  
• If you already have a brush plating kit, then all you may
  need is the Plastic Plating Converter Kit.

*A note on PP Copper and Nickel Plating solution

For the UK, our PP Copper and Nickel Plating Solution can be purchased from our distributor, Golden Solution, based in Trowbridge, Wiltshire. Click HERE to visit the site.

All of these items are unique to Spa Plating and ensure consistent success with plating on non-conductive surfaces. You’ll now not only be able plate on plastic, but also wood, glass, shell, stone, fibre glass - the list is almost endless. All the knowledge you need for success in this exciting new process can be found in our videos or in our freely downloadable Training Manual.

Scroll down for the
'Buy Now' button