Silver Tank Plating Solution – HS

Silver Tank Plating Solution – HS

Our Silver Tank Plating Solution – HS plates fast and bright with little to no requirement for polishing back. To keep your silver solution bright and shiny, you will need to use Silver Tank Brightener HS as per the online calculator. Cyanide free.
The pH of this solution need to be controlled with Silver pH Adjuster which is a special order item.

Silver Tank Plating Solution – HS (1 litre) £79.21 Stock: 4

View Examples

example usage 1

The Silver Tank Plating Solution – HS is designed to be used with the Electrode Ring fitted with 6 Silver Electrodes. You can plate substantial thicknesses quickly and because it plates bright, thick layers it doesn’t need heavy polishing to achieve a high shine. Optimum thicknes of about 10 microns. Cyanide free. To work out how much plating solution you will need to plate your item and how much it will cost please click HERE.

Product Details

Silver Tank Plating Solution – HS

Features Benefits
Designed to be used with our electrode ring fitted with silver electrodes. Plates fast – up to 0.6 microns per minute. This means you can build substantial thicknesses quickly.
No yellowing of deposit after rinsing. Greatly reduces the need for post plating polishing – particularly important if you’re plating very delicate or complexly shaped items.
The silver from the silver electrodes replenishes the silver plated out from the solution. Makes the Silver Tank Plating Solution – HS long life, which means you buy less solution in the long run.

To get the best out of the Silver Tank Plating Solution – HS you need to heat it to 50 degrees centigrade with moderate agitation. Immersing the plated item in water at 60-70 degrees centigrade for 1-2 mins immediately after plating greatly helps the solution’s anti-tarnish properties.

Tech Specs

Operating Conditions and Deposit Data

Plating Factor 0.01A/cm2
Plating rate 0.6 micron per minute (see notes)
Temperature 45 – 60 °C
Silver concentration in solution 20 g/l
pH 9.0 – 10.0 (see notes)
Agitation Stirrer
Electrodes Silver
Post-plating treatment Hot water dip (see notes)
Silver content in plate 99.9 (Balance sulphur, nitrogen)
Cathode efficiency 100%
Hardness 110 – 120 Hv
Density of deposit 10.4 g/cm3
Stress Medium stress (tensile)
Special storage instructions Away from sunlight
Shelf life 2 – 3 years
Health and safety classification Harmful (ingestion), Irritant (skin,eye)
Special considerations None
Transport (UN number) None: Not classified as dangerous for transport

Notes:

  •  Immersing the plated item in hot water at 60-70 degrees centigrade for 1-2 mins
    (or 80 – 90 centigrade for 10 – 60 seconds) immediately after plating prevents
    ‘yellowing’ of the silver and provides a tarnish resistant deposit.
  • Plating rate can be increased to 1 micron/minute especially for articles with smooth edges.
    For higher plating speeds, an increase in agitation may be necessary. Refer
    to further note below.
  • Maximum thickness is around 10 microns.
  • Adjust up if necessary with Silver pH adjuster.
  • A dull coating can indicate the current is too low. Increasing the current in roughly
    small increments can brighten the deposit. This solution is transparent and is
    possible to view the deposition process while plating.
  • Increasing the agitation too much can free particulate contamination from the
    anode bags giving rise to rough deposits.
  • Occasional carbon treatment may be necessary especially after being left idle
    for a period of months.

 

 

Read Manual

For guidance on using our tank plating equipment, please click HERE to see our Electroplating Manual

Delivery Details

Postage Options;
      Certain small items, for example Swabs, Nibs and Plating Pens can be sent by normal post within the UK.
        • The courier option for UK deliveries is FedEx
        • Free UK mainland delivery available on orders over £100
        • International orders usually 3-5 working days.
For all price quotations for deliveries, please add your items to our shopping cart. You will be able to see the shipping costs in the 'Current shipping' box before checking out.
    For Special Orders outside the UK and the EU, please contact us.
Silver Tank Plating Solution – HS (1 litre) £79.21 Stock: 4

Calculator

Choice of solution:

Surface area in square centimetres:

Desired thickness in microns:

Volume of solution required (ml):

Swab type:

Plating time required (mins):