Silver Tank Plating Kit – HB

Silver Tank Plating Kit – HB

This kit is built around our Silver Tank Plating Solution HB. This solution is ideal for building up thick layers of semi-bright to matt silver without any yellowing.
It contains a greatly reduced level of cyanide – only one hundredth compared to that of normal cyanide-containing silver plating solutions. Because of this, it can be transported worldwide.
Thicknesses of over 1000 microns can be plated.
Silver concentration: 35 grams per litre.

Silver Tank Plating Kit – HB
Suggested contents
55 items
: £1,088.69
Below is a suggested kit list. Keep it as it is, or you can remove products you do not need after clicking 'Add to Cart'.  
  • MF Rectifier
  • Economy Rectifier
  • Silver Tank Plating Solution HB 1 Litre
  • Silver Tank Starter HB 25ml
  • Silver Tank HB Brightener 25ml
  • Electrode Ring for 1 Litre Beaker
  • Silver Rod Electrode for 1 Litre Beaker
  • Mesh Electrode 1 Litre
  • Gold Plated Test Strips
  • Hot Plate Stirrer
  • Black Lead (short)
  • Red Lead (short)
  • Red Lead
  • Crocodile Clips
  • Stirring Bar - Large
  • Plating Beaker (1 litre)
  • Beaker Lid
  • Temperature Probe
  • Plating Timer
  • Plating Stand
  • Plating Arms and Clamps
  • Gold Plated Jigging Wire 1meter
  • Wire Cutters
  • Pipette 1ml
  • Pipette 3ml
  • Plastic Tweezers
  • MPU 100ml
  • MPU Fine 100ml
  • MetaSeal
  • Autosol
  • Silver and Gold Polish Cloth
  • Rinse Bottle
  • Rinse Beaker (1 litre)
  • 1 litre Cleaner
  • Filter Papers (5 pack) 1&2 Litre
  • Funnel 1&2 Litre
  • Funnel Holder

View Examples

example usage 1

This kit is your best choice for plating substantial layers of pure silver from 10 microns up. Because thicknesses of over 1000 microns can be plated, it’s ideal for  stopping the allergy effect. If you want to silver electroform, it’s best to first use our copper electroforming process to deposit a layer of copper and then build a thick layer of silver with this kit.

Contents Guide

Kit Contents

MF Rectifier

Features Benefits
Current can be set at start of tank plating process and will remain set at that level throughout No need to check and adjust the setting once the plating process has started, leaving you confident that plating is taking place at a constant level.
Amp meter readable to 2 decimal places Allows the plating of small items such as rings and earrings
Can be adjusted for use with brush plating Allows you to use the brush plating process as a compliment to the tank plating process, which gives greater flexibility with the range of items you can plate. To use it for brush plating, you’ll need to set a constant voltage – just turn up the amps to the maximum setting and adjust the volts to the appropriate level for the brush plating process you require.

Economy Plating Rectifier

Features Applications
Stepped voltage controlled via a selector switch enabling a range from 3 up to 12 volts. Maximum current is 3.0 amps. Perfect for powering the cleaning stage, removing the need to re-set the settings on your MF Rectifier from cleaning to plating.
Fully electrically grounded No ‘touch shock’ when using in countries outside the EU or North America.

Silver Tank Plating Solution – HB

Features Benefits
Designed to be used with our electrode ring, fitted with 6 silver electrodes. Plates fast – over 1 micron per minute is possible.
Thick deposits possible. Especially useful when electroforming.
Ductile plate. No lifting or cracking at elevated thicknesses. Especially useful when electroforming.
Room temperature operation. Can be used at room temperature especially at lower plating rates.
No need for anode bags. Saves on maintenance and gives more room for work in the beaker/bath.
The silver from the silver electrodes replenishes the silver plated out from the solution. Low maintenance.

Hot Plate Stirrer

Features Benefits
Fully variable heat control Allows you to keep your gold plating solution at just the right temperature for optimum performance.
Solution is agitated with a
magnetic stirrer at the bottom of the beaker during plating.
  • Mechanical agitation is a safer alternative to air agitation, as it eradicates any risk of the aerosol effect of the plating solution.
  • Mechanical agitation keeps the gold plating solution moving over the surface of the item being plated in a consistent way, again maximising the efficiency of the plating process.
  • Avoids unnecessary oxidisation of the metal plating solution that air agitation will cause.

Temperature Probe

Features Benefits
Temperature of solutions can be monitored by pointing the probe at the tank, pulling the trigger with the temperature shown on the LED screen. The temperature of your plating solution can be quickly and accurately monitored without you having to submerge a thermometer into the solution, avoiding contamination of your plating solution.

Glass Plating Beaker

Features Benefits
Made of pyrex glass
  • Items being plated can be seen throughout plating process.
  • No staining from plating solution over time.
Comes in 250ml, 500ml and
1litre sizes. With the Mesh Electrodes inserted, the internal dimensions of each size beaker are as follows; 250ml; Height – 7cm, Diameter – 6cm 500ml; H – 10cm, D; 8cm 1Lt; H;13cm, D;8cm
Plate different sized objects individually or in small batches, from rings to trophies.

Electrode Ring

Features Benefits
Made of non-corrodible metal Will not rust and contaminate your plating solution
Has six threaded holes to securely hold six of our Copper Electrodes for 1 L Beaker This allows you a high degree of flexibility. If you only have a small electroforming job, then you may only want to purchase 2 electrodes. Or you can buy the full set of six and arrange them according to the size and shape of the object you’re plating. Either way, you are ensuring you get the optimum performance from our Copper Electroforming Solution.

Silver Electrode for 1 Litre Beaker

Features Benefits
Made of pure silver with a screw thread at one end for easy insertion into our Electrode Ring You can have configurations of 2,3,4 or 6 electrodes depending on how much money you want to spend and the size and shape of the item you’re plating;

Plating Stand

Features Benefits
Made from stainless steel
  • Fully conductive – negative lead connects directly to work through stand, which cuts out need for another trailing wire.
  • Non-corrodible
Designed to be used with our Plating Arm and Plating Arm Clamp (sold separately) Allows for complete flexibility – you can adjust height to of arms to accommodate small 250ml tanks up to and including 5 litre tanks
Electrical connection to work via negative lead, plugged into small socket at base of stand Again avoids having to dangle work on negative lead directly into tank

Plating Arm

Features Benefits
Made bespoke from solid stainless steel and designed to be used in conjunction with the Plating Arm Clamp
  • Fully conductive
  • Will not corrode and contaminate gold tank plating solution
  • When used with clamp, can moved up or down the stand in any position to fit any size of plating beaker.
Has ball head join point at one end to accommodate crocodile clip Ball head allows complete 360 degree movement of crocodile clip, so you can quickly and easily make fine adjustments to the position of you work in the gold plating solution.

Plating Arm Clamp

Features Benefits
Made in-house from non-corrosive stainless steel
  • Fully conductive
  • Will not corrode over time and risk contamination of gold tank plating solution
Precision made from solid stainless steel to fit our Plating Stand perfectly, with wing screw for easy tightening Means that you can fully adjust the height of the arm and it will be held firmly and safely in any position on the stand.

Gold Plated Jigging Wire

Features Benefits
Gold plated No risk of contamination of plating solution during plating
Easy to bend by hand You’ll be able to shape jigs easily for complexly shaped items as well as a number of smaller items all at once.

Cleaner

Features Benefits
Quickly creates a water-break free surface
  • Ideal surface for plating – cuts out contamination from invisible layers of grease

Plastic Beakers x 6

Features Benefits
Lightweight plastic.
NB – Do not place on or near the Hot Plate Stirrer!
The six beakers provide for 2 rinses after the ultrasonic cleaning stage, 2 rinses after the ActiClean stage and 2 rinses after the gold plating stage. The sixth and final rinse should be deionised water.

Rinse Bottle

Features Uses
Made of transparent, flexible plastic Easy to control the rate of water flow
Fine spout
  • Easy to direct flow of water onto work piece – good for rinsing small items and details on larger items
  • Very useful for topping up solution in Plating Beaker lost through evaporation

Filter Kit

Features Benefits
Includes 1Rinse Beaker (1 Litre),1Funnel Holder1Funnel 1 Litre, Filter Papers 1 Litre ( 5 pack) All tank plating solutions occasionally need filtering to remove particles that build up over time. Our filtering kit makes the process of keeping your tank plating solution in tip top condition easy to set up and mess free. Added to this, regular filtering can help you save money by extending the working life of your tank plating solution.

A guide for choosing the right sized beaker for the size of the work you want to plate.

Maximum Working Internal Dimensions of Plating Beakers

Volume

Internal Diameter*

Height**

Type

250ml 44mm 70mm Standard
500ml 63mm 100mm Standard
1 litre 82mm 125mm Thick-Walled
2 litres 106mm 145mm Thick-Walled
* You need to leave a 10mm gap between the outer edge of the work piece and the Mesh, whatever the size of beaker you are using.
** Working height allowing 10mm gap from bottom of beaker

For example, if you are using the 250ml plating beaker your work piece can’t at any point in its width, exceed 44mm and can’t at any point be longer than 70mm.

Kit customisation

A key feature of our kits is the flexibility to be able to customise them by removing items you don’t need or adding extra items from our product range. For example, you may already own a hot plate stirrer, or you may want to you downsize or upsize the plating beaker according to the dimensions of the items you wish to plate. The table below will help you do this.

Kit size: 250ml 500ml 1 Litre 2 Litre
Beaker 250ml Plating Beaker 500ml Plating Beaker 1 Litre Plating Beaker 2 Litre Plating Beaker
Beaker Ring 250ml Beaker Ring 500ml Beaker Ring 1 litre Beaker Ring 2 Litre Beaker Ring
Silver Electrodes 2 x Silver Electrodes for 250ml Beaker 4 x Silver Electrode for 500ml Beaker 6 x Silver Electrode for 1 Litre Beaker 8 x Silver Electrode for 2 Litre Beaker
Anode Bags 2 x Anode Bag for 250ml Beaker 4 x Anode bag for 500ml Beaker 6 x Anode Bag for 1 Litre Beaker 8 x Anode Bag for 2 Litre Beaker
Stirrer Stirring Bar (Medium) Stirring Bar (Large) Stirring Bar (Large) Stirring Bar (Extra Large
Silver Tank Plating Solution HS 250ml 500ml 1 litre 2 litres

 

Example:
The advertised kit is the 1 litre kit. If you want to downsize to the 250ml kit you will need to remove the 1 Litre Plating Beaker, 1 Litre Beaker Ring, 6 x Silver Electrode for 1 Litre Beaker, 6 x Anode Bag for 1 Litre Beaker, Stirring Bar (Large) and 1 litre Silver Tank Plating Solution HS.
You will then need to add the 250ml Plating Beaker, 250ml Beaker Ring, 2 x Silver Electrodes for 250ml Beaker, 2 x Anode Bag for 250ml Beaker, Stirring Bar (Medium) and 250ml Silver Tank Plating Solution HS.
Items can be removed and added either on our shop page or on the shopping basket prior to checkout.

Delivery Details

Postage Options;
      Certain small items, for example Swabs, Nibs and Plating Pens can be sent by normal post within the UK.
        • The courier option for UK deliveries is FedEx
        • Free UK mainland delivery available on orders over £100
        • International orders usually 3-5 working days.
For all price quotations for deliveries, please add your items to our shopping cart. You will be able to see the shipping costs in the 'Current shipping' box before checking out.
    For Special Orders outside the UK and the EU, please contact us.
Silver Tank Plating Kit – HB
Suggested contents
55 items
: £1,088.69
Below is a suggested kit list. Keep it as it is, or you can remove products you do not need after clicking 'Add to Cart'.  
  • MF Rectifier
  • Economy Rectifier
  • Silver Tank Plating Solution HB 1 Litre
  • Silver Tank Starter HB 25ml
  • Silver Tank HB Brightener 25ml
  • Electrode Ring for 1 Litre Beaker
  • Silver Rod Electrode for 1 Litre Beaker
  • Mesh Electrode 1 Litre
  • Gold Plated Test Strips
  • Hot Plate Stirrer
  • Black Lead (short)
  • Red Lead (short)
  • Red Lead
  • Crocodile Clips
  • Stirring Bar - Large
  • Plating Beaker (1 litre)
  • Beaker Lid
  • Temperature Probe
  • Plating Timer
  • Plating Stand
  • Plating Arms and Clamps
  • Gold Plated Jigging Wire 1meter
  • Wire Cutters
  • Pipette 1ml
  • Pipette 3ml
  • Plastic Tweezers
  • MPU 100ml
  • MPU Fine 100ml
  • MetaSeal
  • Autosol
  • Silver and Gold Polish Cloth
  • Rinse Bottle
  • Rinse Beaker (1 litre)
  • 1 litre Cleaner
  • Filter Papers (5 pack) 1&2 Litre
  • Funnel 1&2 Litre
  • Funnel Holder

Calculator

Choice of solution:

Surface area in square centimetres:

Desired thickness in microns:

Volume of solution required (ml):

Swab type:

Plating time required (mins):