Platinum Pen Plating Solution (UK and EU only)

£35.00£215.70 + VAT

Clear selection

This Platinum Pen Plating Solution contains 25 grams of platinum per litre and has been designed specifically for pen plating. It plates a hard-wearing, bright layer of platinum. Ideal for both decorative and functional purposes. When plating on to copper or brass, pre-plate with a thick layer of gold, silver or nickel.
You will need to use our fibre nibs with this solution. Standard nibs are not suitable for plating platinum. This plating solution can be used with our Battery Powered Plating Pen or our Plating pen with our MF Rectifier, links to which can be found below in the ‘Related Products’ section.

Orders outside UK and EU

This plating solution cannot be purchased and shipped outside the UK and the EU because it’s part of our range of plating solutions which are regulated for transport.

You could substitute this with our Palladium Pen Plating Solution, details of which can be found by clicking HERE.

 

HS Code: 3824 99 70

The following video shows how to use our gold pen and brush plating kit and would be suitable for use with this solution.

Back to Product Description

Operating Conditions and Deposit Data

Voltage Range 8.0 – 10.0 volts
Temperature 25 – 35 °C (see notes)
Platinum concentration 25 g/l
Lightness (L*) of deposit 75 – 78%
Electrode Platinum, Carbon
Platinum content in plate Above 99.9%
Plating Rate at (3.5 volts, Platinum electrode) Approx. 0.2 – 0.4 micron per minute (spot) – see notes
Hardness 450 – 500 Hv
Density of deposit 21.4 g/cm3
Electrical resistivity of deposit 9.8 micro ohms/cm
Stress High (tensile)
Maximum deposit thickness 4 – 5 microns
Special storage requirements None
Shelf life Over 2 years
Health and Safety classification Irritant
Special considerations None
Transport (UN number) 2796

 

Notes:

  • The plating rate increases considerably between 25 and 35 °C. Try to position your work on a
    warm surface. You could also use an infrared lamp as a form of heating.
  • Higher voltages give greater plating rates, however more spray is produced and a mist mask is recommended.
  • Plating rates are calculated over a sample area which is permanently covered by swab.
  • Will plate directly onto freshly prepared nickel or stainless steel.

Some items are regulated for transport and can only be delivered to destinations in the UK and countries within the EU. Alternative or substitute products are detailed in the ‘Description’ tab of this tabbed panel or under Related Items below this tabbed panel.
For all price quotations for deliveries, please add your items to our shopping cart. You will be able to see the shipping costs by clicking on the ‘Calculate shipping’ button in the cart and before checking out.

Please click on the link below to download the SDS for this product:

https://goldn.b-cdn.net/msds/platinum_pen_plating_solution.pdf