Green Gold Mixer

£18.64£34.30 + VAT

Clear selection


SKU: N/A Category:

When mixed with our K-Gold in varying ratios, our Green Gold Mixer creates beautiful shades of green gold. Recommended electrode – Carbon Electrode 2 volts. For brush and pen plating.


HS Code: 3824 99 70

The bottom right earring has been plated with green gold plating solution created with our Green Gold Mixer. The top left earring (just seen) has been plated with our Gold Pen Plating Solution for contrast. To find out how to mix our Coloured Metal Mixers, please click HERE to see our Electroplating Manual. You can use this mixer with our Battery Powered Plating Pen, our Plating Pen and our brush plating equipment. With our plating pens and our brush plating equipment you’ll need to use our MF Mk II Rectifier. We do not advise you use our Powered Plating Rectifier as this can only go down to 2.8 volts and this mixed solution requires 2 volts.

Features Used for
Total control over intensity of shade according to ratio of Green Gold Mixer to K-Gold Creating a wide variety of shades from a lime green to an antique gold. Great for plating the inside of metal ware items such as chalices, sugar bowls and napkin rings

When plating on to stainless steel, nickel and its alloys, first plate a layer of 24 carat gold using our Gold Flash.

A guide to our Coloured Metal Mixers

The table below provides a quick reference to help you decide which mixer you should combine with which base and the correct voltage and electrode you should use.
Please refer also to the 'Tech Specs' tab of the tabbed panel on each product's product page.
NB; When plating your prepared rose gold and green gold plating solution on to stainless steel, nickel and its alloys, first plate a layer of 24 carat gold using our Gold Flash.

A quick reference guide to our Coloured Metal Mixers

Plating Solution Type of mixer and base solution Ration of mixer To base solution Volts How it’s used and tips on application Electrode
White bronze White Bronze Mixer/Copper Brush Plating Solution. Leave to stand for 15 minutes before using. Use within 24 hours. 2 1 3 – 3.5 Can be used as a low-cost, tarnish resistant alternative to silver plate. As an undercoat when plating on to copper and its alloys, tin and its alloys, including solder. As an undercoat when black chrome plating on to copper. Suitable power source: MF Rectifier Mk II Stainless Steel
Rose gold Rose Gold Mixer/K-Gold 1 for an 18ct rose gold alloy and 2 for a 12ct rose gold alloy 10 2 Pre-plate a layer of gold using Gold Flash when plating on to stainless steel, nickel and nickel containing alloys. Suitable power source: MF Rectifier Mk II Carbon – 2 volts

Platinum – 3 volts

Green gold Green Gold Mixer/K-Gold 1 to 3 depending on shade 10 2                                        “ Carbon
A shade of gold that resembles freshly polished brass Brass Effect Gold Mixer/K-Gold 1 10 2 Used to recreate the shade of freshly polished brass. Can be used to recreate some shades of Ormolu. Carbon

Composition of coating

Ratio of Green Gold Mixer to K-Gold Shade Produced Comments
1:10 yellow-green
2:10 Green gold
85% gold – 21 carat
Deposit starts to dull after 0.25 micron and burn after 0.5 micron
3:10 green tint
78% gold – 19 carat
Deposit starts to dull after 0.5 micron and burn after 0.75 micron
4:10 light green
71% gold – 17 carat
Deposit starts to dull after 1 micron
No burning
6:10 Light green
64% gold – 15 carat
Light polishing required
8:10 Very pale green
55% gold – 13 carat
Light polishing required
10:10 Almost white
51% gold – 12 carat
Light polishing required
12:10 47% gold – 11 carat
Silver-white gold
Light polishing required



  • Tendency to burn deceases as more mixer is added over a 4:10 ratio
  • Light burning can be removed by rubbing with MPU and continuing plating if necessary

Operating Conditions and other data

Voltage Range 3 volts
Temperature 20 – 25 °C
Electrode Carbon
Gold content in plate See table above
Plating Rate at (3.5 volts, Platinum electrode) Approx. 1 micron per minute (spot)
Hardness Not known
Density of deposit Not known
Stress Medium stress
Special storage requirements Away from sunlight
Shelf life 1 – 2 years
Health and Safety classification Irritant
Special considerations None
Transport (UN number) None: Not classified as dangerous for transport


General guide;

Certain small items, for example Swabs, Nibs and Plating Pens can be sent by normal post within the UK

  • The courier option for UK deliveries is FedEx
  • Free UK mainland delivery available on orders over £200
  • International orders usually 3-5 working days.

For all price quotations for deliveries, please add your items to our shopping cart. You will be able to see the shipping costs by clicking on the ‘Calculate shipping’ button in the cart and before checking out.

You can access our MSDS by scanning the QR code which is on our product bottles.
Here is a video to show you how;