Nickel Strike can be used for plating a key layer on to the more difficult-to-plate stainless steel alloys which will help the adhesion of subsequent plated layers.
Orders outside UK and EU
This plating solution cannot be purchased and shipped outside the UK and the EU because it’s part of our range of plating solutions which are regulated for transport.
You could substitute this with our Gold Flash Brush Plating Solution which can be shipped outside the UK and the EU. Details of this alternative product can be found by clicking on the link in the ‘Related Products’ section, below this panel.
HS Code: 3824 99 70
Our Nickel Strike has been developed to help when plating on to certain grades of Stainless Steel. A number of stainless steel alloys, especially the more non-corrosive or passive ones, can prove very difficult to plate, even when using our MPU process. Please note that there are still some stainless steel alloys that are extremely passive. In this case it would be a good idea to try our Gold Strike plating solution.
Brush Calculator
Operating Conditions and Deposit Data
Voltage
3 – 3.5 volts
Temperature
14 – 25 °C
Electrode
Nickel
Plating Rate at (3.5 volts, Platinum electrode)
Approx. 0.3 micron per minute (spot)
Hardness
620 – 630 Hv
Density of deposit
8.9 g/cm3
Stress
High stress
Special storage requirements
None
Shelf life
Over 2 years
Health and Safety classification
Harmful
Special considerations
Corrosive
Transport (UN number)
1789 PG. III
Notes:
We strongly advise against the use of stainless steel anodes for most of our plating processes
Plating rates are calculated over a sample area which is permanently covered by swab.
Some items are regulated for transport and can only be delivered to destinations in the UK and countries within the EU. Alternative or substitute products are detailed in the ‘Description’ tab of this tabbed panel or under Related Items below this tabbed panel.
For all price quotations for deliveries, please add your items to our shopping cart. You will be able to see the shipping costs by clicking on the ‘Calculate shipping’ button in the cart and before checking out.
You can access our MSDS by scanning the QR code which is on our product bottles.
Here is a video to show you how;