Mini Contact Probe

£6.39 + VAT


SKU: 4478 Categories: ,

Useful for making electrical contact with very small areas such as selective plating of jewellery and PCBs.

Our Mini Contact Probe being used to gold plate a PCB with our Battery Powered Plating Pen and our Gold Pen Plating Solution.

Features Used
Small probe used for making electrical contact For making electrical contacts with very small areas such as jewellery and PCBs. Particularly useful when plating car badges in-situ


Gold pen plating on stainless steel electrical connections

Gold plating using the pen plating process is ideal for connections in electrical equipment as the pen equipment is small enough to precisely plate the gold in restricted areas. This guide features gold pen plating the stainless steel connector pins in a photomultiplier. It is an extremely sensitive detector of light in the ultraviolet, visible, and near-infrared ranges of the electromagnetic spectrum and is widely used in medical, astronomical and particle physics research. Gold pen plating will optimise its performance, by enhancing its corrosion resistance in humid environments.
When plating any kind of electrical equipment, a vital consideration is avoiding moisture penetrating its workings and inhibiting the flow of electricity. The project shows how to get round this problem by using out Thickener, which stops your solution from dripping and running off.

1. What you’ll need

Equipment; MF Rectifier or the LED Pen Rectifier, Pen and Beaker stand, Plating Pens, Pen Plating Clip Tray, Mini Contact Probe, Pen Nibs (pointed and paddle shaped), fine gauge copper wire, .

Solutions and Materials; Thickener, ActiClean, Gold Pen Plating Solution, rinse bottle with deionised water.


NB  Click HERE for instructions on setting up the MF Rectifier for pen plating.

2. Preparing the photomultiplier - wiring up

Begin by cleaning the wire thoroughly with MPU and a piece of clean paper towel. Secure one end of the wire by wrapping it around one of the contacts and then proceed to weave/loop the wire in and out of the rest of the contacts, to form a continuous electrical link. This will save you a lot of time and hassle having to touch the black negative lead as well as the pen nib to each connector.

The mini contact probe is really useful for keeping the wire down against the glass and preventing it from slipping back off the connectors.

3. ActiCleaning 5 - 7 volts

Prepare the ActiClean by gelling it with the Thickener; this will prevent it from running all over your piece of equipment. For guidance on how to prepare Thickener, please see our guide in this manual. Grip one end of the copper wire with the crocodile clip, and ActiClean each connector in turn.

Once you have finished, wipe off any excess gelled ActiClean with a clean paper towel and rinse lightly with the deionised water.

4. Gold plating 5 - 6 volts

Gel the gold pen plating solution and adjust the voltage for gold pen plating. Plate each connector for approximately 30 seconds. Repeat the cleaning process outlined in the previous step.

Please see our guide to using the Battery Plating Pen with advice correct placement of the Nib into the end of the Plating Pen.

5. Finished photomultiplier

5Finished photomultiplier Don’t worry if you were unable to plate right down to where the connector enters the glass. The aim of the gold plate is functional rather than aesthetic; it is there to aid connectivity and is therefore only critical at the ends of the connectors rather than at their base.

General guide;

Certain small items, for example Swabs, Nibs and Plating Pens can be sent by normal post within the UK

  • The courier option for UK deliveries is FedEx
  • Free UK mainland delivery available on orders over £100
  • International orders usually 3-5 working days.

For all price quotations for deliveries, please add your items to our shopping cart. You will be able to see the shipping costs by clicking on the ‘Calculate shipping’ button in the cart and before checking out.